Allows you to search a variety of questions and answers
If you need a 2gbps NIC, you need to bond dual 1gbps NICs. It is done using the following way.
1. For your eth0 and eth1 (or whatever your 2 nics are named), you will put the following:
Code:
DEVICE=eth# HWADDR=NIC HW address goes here BOOTPROTO=none ONBOOT=yes USERCTL=no MASTER=bond0 SLAVE=yes
Obviously change the eth# to eth0, eth1, or whatever the nic name is and change the HWADDR line to the correct hw addr of the NIC.
2. Now we need to create the ifcfg-bond0 file using the following command:
Code:
touch /etc/sysconfig/network-scripts/ifcfg-bond0
3. Open up the newly created bond0 file and put the following into it:
Code:
DEVICE=bond0 IPADDR="1.1.1.1" NETMASK="255.255.255.0" GATEWAY="1.1.1.1" ONBOOT=yes BOOTPROTO=none USERCTL=no BONDING_OPTS="miimon=80 mode=4 xmit_hash_policy=layer3+4"
Replace the IP, netmask and gateway with your respective values. Save and restart network:
Code:
/etc/init.d/network reload
You should now be running on a bonded nic. You can check using the ifconfig command and will see bond0 with the primary IP.
Note: If you are running intel nics, it is a smart idea to add the following to the /etc/grub.conf kernel line, at the end:
Code:
pcie_aspm=off
Then save and reboot the server. This will ensure that the NICs won't fall asleep.
Need to setup bonding on a Debian/Ubuntu server? No problem, Go here.
Hi Guys and Gals, I'll just say you all are top notch and go above and behind with support. I've tested many other companies none compare to the expertise you all. Previously I would just get a ticked bumped up to a higher level of tier support etc. with AYK everyone is knowledgeable and prompt. Thank you for offering a premium hosting solution. Warm Regards, Johnny
Hi guys, I am pretty satisfied with your service. Yes, I have experienced some downtime issues with my boxes, but you guys have always been right there for me, at my beck and call whenever I need you. Additionally, you guys are always more than fair when it comes to helping me configure my boxes with my DirectAdmin control panel. Overall, I am very pleased with the service, both in terms of the hardware I receive from you as well as the customer service. Prices seem to be quite fair too. Thanks, Ephi
After getting a dedicated server from AYK for almost 2 years, I couldn't be more happy. The prices are very reasonable, I haven't experienced a moment of downtime, the support is excellent and truly 24/7. You have a critical issue at 2am? You will have it sorted out in less than 15 minutes. If you are looking for honest, reliable and affordable hosting provider, look no further!